Home PageMold Remediation CostsAbout UsPictures and FactsMOLD REMOVALPICTURE GALLERYNew Project PhotosPRODUCTSNEW PRODUCTS / PHOTOS TAKE A MINUTE TO LOADComing soonProduct testimonialsAll Customer TestimonialsServicesContact Us

 This New Jersey basement had a water leak that caused a serious mold problem.
The project was postponed for three weeks and mold took over the basement.
The mold growth during our first inspection was minimal. Three weeks later the mold took over the entire basement. Most of the drywall on the walls had to be removed and ceiling tiles were contaminated. Paneling needed to be removed as well as wallpaper.
It is important to have mold spores destroyed as soon as it is discovered.

Mold growing out of control
Skymold2.JPG
Mold contamination in office area
Skyofficemold.JPG
Pipe break behind bathroom wall
pipebreak.jpg
Closet and bathroom with visible mold
Bathroomandclosetbefore.jpg
Bathroom wall is contaminated behind wall tile
Bathroomkillermold.jpg
A close up look at dead mans mold
Bathroomdeadmansmold.jpg
Laundry room with visible mold
laundryroomcontamination.jpg
Laundry room remediation in progress
Laundryroomremediation.jpg
Bathroom ceiling tile contaminated
Ceilingtilecontamination.jpg
Ceiling tiles with mold on the bottom
Ceilingtilemold2.jpg
Garage with mold on soaked drywall
Garagemoldondrywall.jpg
Mold behind paneling on drywall
Moldbehindpaneling.jpg
Living room decontaminated and cleaned
Livingroomsaved.jpg
Mold contamination from water leak
fireplace1.jpg
Mold on Paneling above Fireplace
fireplacewall.jpg

Mold and fireproof Sealer  

Mold and Fire Block Foundation Moisture barrier

Mold and fire waterproof Concrete Wall Sealer
Carmonsealwalls.jpg
Electrical and water service door framing
Carmondoorframing.jpg
Framing, Insulation, Electrical outlets
Carmonwallframing.jpg

More photos coming soon

HVAC water leak created mold environment
Skymold3.JPG
Mold on painted black drywall
SkymoldJPG.JPG
Moisture creates the environment for Mold growth
MoldbehindpipesJPG.JPG
Rear of bathroom wall behind tile with mold
Behindbathroomwall.jpg
Double wall of wallboard with toxic mold
bathroomdoublewall.jpg
Bathroom decontaminated with drywall removed
Bathroomafter.jpg
Laundry room after removing wall paper
Laundryroomwallpaperremoved.jpg
Laundry room decontaminated
Laundryroomdecontaminated.jpg
Contamination above ceiling tiles in bathroom
Aboveceilingtile.jpg
Ceiling tiles with contamination on top
Ceilingtilemold1.jpg
Garage wall with only framing remaining
Garagewallafterremediation.jpg
Paneling removed along with contaminated drywall
Bedroomdecontaminated.jpg
Another successful remediation project completed
Finalcleanup.jpg
After Mold Removal
Fireplace2.JPG
Paneling Removed ( Surprise )
Wallopen.JPG

Mold and fireproof sealer

Mold and Fire Paint Sealer

Mold and fireproof Painting Finish
carmonwallJPG.JPG
Mold and fireproof Wall and Door Complete
Carmonservicedoor.jpg
Moisture resistant drywall application
Carmondrywall.jpg

More photos coming soon

   
   
   
   
   
   
   
   
   

  A small pipe leaking turned this basement into a mold farm.
      Water leaks give mold the moisture it needs to grow.

The mold spore must be destroyed using our product that will  penetrate and rupture it thereby ending its life. Foggers can dry before penetration occures so we feel spraying and getting right to the spore area works the best.
Bleach, iodine, and industrial cleaners only kill about 10%.
Wearing protective gear our remediation specialist kills mold at
99.9% in 30 seconds. 
That's why most contractors and Realtors prefer our system over all.

Once all Mold spores are destroyed we clean or remove contents and then have the option to rebuild and finish with our mold resistant
paint and sealer for a mold free environment. This type of work is very costly due to the protection procedures needed to re-mediate.
Following strick guidelines is imperitive and deviating from this can result in a failed remediation project and mold regrowth after removal
Our steps are in stone and we have an excellent record in removal.
Our products are all Earth friendly and do not harm pets or humans.

Email questions to; moldinfo@ptd.net

Enter supporting content here